ALORAIRTOESPACE KICKSPACE HEATER WARMHUB 15

$209.00 USD

Sale Sold out

78 in stock

Ships: Same Day Via Freight Carrier Order by 11am CST

AlorairToespace is perfect for rooms with unutilized toe-kicks and undercabinet spaces. This 1,350-watt, 4,700 BTU heater is an excellent supplementary heater for kitchens and rooms 100-150 sq. ft. wide.

3-Second Rapid Heating

AlorairToespace heats up in just three seconds. You’ll soon feel a noticeable change in temperature, and the room will be warm in no time.

Small Enough for Your Toe-kicks

With its compact size (18.35 x 6.97 x 4.25 inches), AlorairToespace fits perfectly in the toe-kicks of kitchen counters, built-in benches, cabinets, staircases, and hallway closets.

Quiet, Strong Heating Capacity

AlorairToespace is great as a primary or supplementary heating source at 4,700 BTU. But unlike other kickspace heaters with a similar heating capacity, it is very quiet at just 53.8 dbA.

Built-In Timer and Off-Delay Feature

You can turn the heater on and leave without worries because AlorairToespace has a 10-hour timer. It also has a 2-minute off-delay feature, maximizing the heat generated by the WarmHub 15.

Dual Overheating Protection

AlorairToespace offers dual tip-over protection and automatically switches off when the temperature goes higher than 212°F/ for100°C your peace of mind.

User-Friendly Touchpad with Digital Display and Remote Control

Choose from 29 Presets or set your preferred temperature (40°F - 98°F) via the control touchpad. You can also turn the heater on/off or adjust the temperature with the remote control.

Main Specifications	Voltage	115 V / 60 Hz
	Power/Consumption	1,350 W
	Heat Output	4,700 BTU
	Heating Speed	3 seconds
	Temperature Settings	40 - 98°F
	- temperature presets	29 presets`
	Circulation / Fan Speed	100 CFM (per 150 sq. ft)
	Noise	53.8 dBA
	Heating Pipe	WarmHub 15

Heater Dimensions	Height	4.24 in
	Length	18.29 in
	Depth	6.65 in

Grille Dimensions	Height	4.47 in
	Length	20.14 in

Features	Fan
	Built-In Timer	up to 10 hrs
	Delay Power Off	2 mins
	Thermostat
	Dual Over-Heat Protection
	- Over-Heat Protection: Auto Shut-Off	> 2°F higher than the preset temp.
	- Over-Heat Protection: Mechanical	> 212°F
	- Auto-Restart	< 176°F
	Control Panel with LED Display (touchpad)
	- power button
	- set temperature button
	- set timer button
	- current room temperature display	numerals
	- preset temperature display	numerals
	- power light indicator	LED
	- timer light indicator	LED
	Decorative Grille

Inclusions
	Infrared Remote Control	Sold separately
	- remote control functioning range	26.9ft

Download Installation Manual

View full details

Space Saving Design: The Hallmark of a Kickspace Heater

AlorairToespace tucks neatly under cabinets at 4.24 inches high. It stays out of the way, occupying underutilized space, and keeps floors clutter-free.

Quick Heating

The heater consumes 1,350 watts to deliver a max output of 4,700 BTU.

Easy Setup

Turn the heater on or off with one tap on the control keypad or using the remote control. You can also input your preferred temperature settings (40 - 98°F ) and set a timer (up to 10 hours) for the heater.

Double Safety Feature

The built-in thermostat automatically shuts off when the ambient temperature goes 2°F higher than your preset temperature. If the thermostat fails to shut down and the heat climbs to 212°F/100°C, the thermal fuse instantly cuts off power to prevent electrical fire.

Heating that never gets in the way.
Get reliable, space-saving heating solutions with AlorairToespace.

INSTALLATION GUIDE

AlorairToespace must be installed by a qualified professional.
Power breaker must be turned off before connecting any wiring.
Observe all applicable fire safety codes and standards.
Check that the power supply matches AlorairToespace’s voltage requirement.
AlorairToespace should be installed horizontally.
Refer to the Installation and Operations Manual for more detailed instructions.

We recommend the following materials:

Flexible conduit for field wiring
Use standard building wires with a resistance rating that is appropriate for this heater.

REPLACING THE POWER CORD

STEP 1

Use a screwdriver to remove the front grille and rear panel.

STEP 2

Loosen the screws of the strap holding the wires in place. Unlink the three cables and remove the original power cord.

STEP 3

Insert the new power cord and link the three cables to their designated terminals, as shown in the diagram.

STEP 4

Replace the front grille and rear panel of the housing once the power cable is secured.

STEP 1: Use a screwdriver to remove the front grille and rear panel.

STEP 2: Loosen the screws of the strap holding the wires in place. Unlink the three cables and remove the original power cord.

STEP 3: Insert the new power cord and link the three cables to their designated terminals, as shown in the diagram.

STEP 4: Replace the front grille and rear panel of the housing once the power cable is secured.

SAFETY & MAINTENANCE REMINDERS

Turn off the power from the breaker panel before cleaning, repairing, or installing the heater.
The top cover MUST BE INSTALLED before turning on the heater.
Clean the unit regularly. Servicing must be done by a qualified technician (refer to the manual for detailed instructions on how to open and clean the unit).
If the unit is used as a primary heater, it must be inspected by a professional at least once a year.